Takeuchi TW80 SERIES 3

Takeuchi TW80 SERIES 3 for sale at American Falls, Blackfoot, Idaho Falls, Rexburg, Rupert, Idaho

Double tap to zoom

Takeuchi TW80 SERIES 3 for sale at American Falls, Blackfoot, Idaho Falls, Rexburg, Rupert, Idaho

 

Features

ENGINE

  • U.S. EPA Final Tier 4
  • DOC Exhaust After Treatment
  • Turbocharged
  • Water Cooled
  • Dual Element Air Cleaner
  • High Capacity Radiator

 

ELECTRICAL

  • Multi-Informational Monitor
  • 12 volt System with 95 amp Alternator
  • Work Lights: Front and Rear
  • Driving Lights and Turn Signals
  • Directional Lights: Fwd / Rev
  • Engine Preheat
  • Back-up Alarm

 

DRIVE TRAIN

  • Hydrostatic Drive with 100% Inching Pedal
  • 100% Locking Differentials: Front and Rear
  • Two-Speed Travel
  • Outboard Planetary Drives
  • Spring Applied Parking Brake
  • Multi-Wet Disc Brake
  • Rigid Axles with Outboard Planetary Reduction
  • 15 19.5 Heavy Duty Construction Tire Assembly (Optional)
  • High Speed Road Gear with Ride Control (24.8 mph) (Optional)

 

OPERATOR’S STATION

  • Enclosed Cab with Air Conditioning, Heat, Front and Rear Wipers, Front and Rear Washers, and Rear Defrost
  • Elevated Operator’s Station
  • ROPS / FOPS Protection
  • Deluxe Air Suspension Seat with Arm Rests
  • Multi-Functional Joystick for Machine Direction Forward and Reverse and Loader Controls
  • Auxiliary Circuit Thumb Switch and Loader Controls
  • Large Steps and Grab Handles
  • 2” Retractable Seat Belt
  • 3” Retractable Seat Belt (Optional)

 

HYDRAULIC & WORKING EQUIPMENT

  • Pilot Control
  • Proportional Thumb Wheel for Coupler or Auxiliary Hydraulic Circuit
  • Auxiliary Hydraulic Lines Plumbed to End of Loader Arms
  • Auxiliary Hydraulic Detent
  • Hydraulic Oil Level Sight Gauge
  • High Capacity Hydraulic Oil Cooler
  • Z-Bar Linkage
  • Bucket Float Function
  • Mechanical Bucket Positioning
  • Heavy Duty Hydraulic Bucket Quick Coupler
  • Heavy Duty Self Aligning Loader Bushings with Oversized Pins
  • 81.5” General Purpose Bucket (1.3 yrds) (Optional)
  • Bolt-On Reversible Cutting Edge for 81.5” Bucket (Optional)
  • High Flow Auxiliary Hydraulics (26.0 gpm) (Optional)
  • Combo Hitch to Universal SSL Adaptor (Optional)
  • Flat Face Hydraulic Coupler Kit (Optional)

Specifications

OPERATING PERFORMANCE  
Operating Weight - Cab 12,700 lb  (5,760 kg)
Tipping Load, Straight 9,742 lb   (4,419 kg)
Tipping Load, Full Turn 8,602 lb   (3,902 kg)
Operating Capacity, SAE J818* 4,301 lb   (1,951 kg)
Bucket Breakout Force 13,960 lb   (6,333 kg)
Lift Arm Breakout Force 12,387 lb   (5,618 kg)
Traction Force 12,049 lb   (5,466 kg)
Travel Speed - Low Range 4.0 mph   (6.5 km/hr)
Travel Speed - High Range 12.4 mph   (20.0 km/hr)
Optional High Speed Travel 24.8 mph   (40.0 km/hr)
* Rate Operating Capacity (ROC) for wheel loaders is rated with a bucket  
according to SAE J818 at no more than 50% of the full turn tipping load.  
HYDRAULIC SYSTEM  
Auxiliary Flow - Primary Circuit 16.4 gpm  (62.0 Lpm)
Auxiliary Flow - Optional Circuit 26.0 gpm   (98.0 Lpm)
Hydraulic System Pressure 3,335 psi   (23.0 MPa)
ENGINE  
Make/Model Deutz / TD2.9L Turbo
Engine Displacement 176.0 cu in   (2.9 L)
Horsepower @ 2,200 rpm 73.0 hp    (54.0 kW)
Maximum Torque @ 1,800 rpm 192.0 ft-lb   (260.0 Nm)
FLUID CAPACITIES  
Engine Lubrication 8.5 qt   (8.0 L)
Cooling System 13.7 qt   (13.0 L)
Fuel Tank Capacity 26.4 gal   (100.0 L)
Fuel Consumption (65% of Full Load) 2.6 gal/hr   (10.0 L/hr)
Hydraulic Reservoir Capacity 22.2 gal   (84.0 L)
Front Axle Lubrication 5.7 qt    (5.4 L)
Rear Axle Lubrication 5.4 qt   (5.1 L)
MACHINE DIMENSIONS  
Max. Lift Height to Bucket Pin 11 ft 1.0 in   (3,380 mm)
Dump Height Fully Raised 8 ft 6.0 in   (2,605 mm)
Max. Reach Fully Raised 2 ft 5.0 in   (740 mm)
Dump Angle 45°
Rollback Angle 48°
Overall Length with Bucket 18 ft 3.0 in   (5,580 mm)
Overall Height 8 ft 11.5 in   (2,730 mm)
Overall Operating Height 13 ft 10.0 in   (4,220 mm)
Bucket Clearance Height 9 ft 11.0 in   (3,025 mm)
Wheel Base 7 ft 2.6 in   (2,200 mm)
Ground Clearance 1 ft 6.5 in  (470 mm)
Overall Width without Bucket 6 ft 9.0 in   (2,050 mm)
Turning Radius at Bucket Edge 14 ft 8.0 in   (4,478 mm)
Outside Turning Radius 13 ft 3.0 in   (4,046 mm)
Inside Turning Radius 6 ft 3.0 in   (1,898 mm)
Recommended Bucket Width 81.5 in   (2,070 mm)