Takeuchi TW60 Series 2

Takeuchi TW60 Series 2 for sale at American Falls, Blackfoot, Idaho Falls, Rexburg, Rupert, Idaho

Double tap to zoom

Takeuchi TW60 Series 2 for sale at American Falls, Blackfoot, Idaho Falls, Rexburg, Rupert, Idaho

 

Features

ENGINE

  • EPA Tier 4 Compliant
  • DOC / DPF Exhaust After Treatment
  • Turbocharged
  • Water Cooled
  • Dual Element Air Cleaner
  • Heavy Duty Radiator and Hydraulic Oil Cooler

 

ELECTRICAL

  • Electronic Engine Monitoring System Includes High Beam Indicator, Turn Signal Indicators, High Speed Indicator, Directional Lights Fwd / Rev
  • 12 volt System with 55 amp Alternator
  • Work Lights: Front and Rear
  • Driving Lights and Turn Signals
  • Engine Preheat
  • Back-up Alarm

 

DRIVE TRAIN

  • Hydrostatic Drive with 100% Inching Pedal
  • 100% Locking Differentials: Front and Rear
  • Outboard Planetary Drives
  • 2 Speed Travel
  • Spring Applied Parking Brake
  • Multi-Wet Disc Brake
  • High Speed Travel 17.4 mph (28.0 km/h) (optional)
  • 15-19.5 Heavy Duty Construction Tire Assembly (optional)

 

HYDRAULIC & WORKING EQUIPMENT

  • Priority Steering
  • Auxiliary Hydraulic Lines Plumbed to the End of the Loader Arms
  • Auxiliary Hydraulic Detent
  • Hydraulic System Test Ports
  • Hydraulic Oil Level Sight Gauge
  • Loader Arm Float
  • Heavy Duty Hydraulic SSL Style Quick Attach Coupler
  • Z-Bar Linkage
  • Bucket Float Function
  • Heavy Duty Self Aligning Loader Bushings with Oversized Pins
  • 76.5" General Purpose Bucket
  • Bolt-on Reversible Cutting Edge for 76" Bucket (optional)
  • Flat Face Hydraulic Couple Kit with Case Drain and Pressure Release Knob

 

OPERATOR'S STATION

  • Enclosed Cab with Air Conditioning, Heat, Front and Rear Wipers, Front and Rear Washers, and Rear Defrost
  • Deluxe Lighting Package for Work, Driving and Signal Lights
  • Elevated Operator's Station
  • ROPS / FOPS Level 1 Protection
  • Multi-Functional Joystick for Machine Direction (FWD/REV) and Loader Controls (Raise, Lower, Curl, and Dump)
  • Suspension Seat
  • Large Steps and Grab Handles

Specifications

OPERATING PERFORMANCE  
Operating Weight - Cab 10,692 lb  (4,850 kg)
Tipping Load, Straight 6,689 lb  (3,034 kg)
Tipping Load, Full Turn 5,906 lb   (2,679 kg)
Operating Capacity, SAE J818* 2,953 lb   (1,340 kg)
Bucket Breakout Force 6,294 lb   (2,855kg)
Lift Arm Breakout Force 6,002 lb   (2,722 kg)
Traction Force 8,818 lb   (4,000 kg)
Travel Speed - Low Range 4.0 mph   (6.5 km/hr)
Travel Speed - High Range 12.4 mph   (20.0 km/hr)
Optional High Speed Travel 17.4 mph   (28.0 km/hr)
* Rate Operating Capacity (ROC) for wheel loaders is rated with a bucket  
according to SAE J818 at no more than 50% of the full turn tipping load.  
HYDRAULIC SYSTEM  
Auxiliary Flow - Primary Circuit 15.2 gpm   (57.5 Lpm)
Hydraulic System Pressure 3,408 psi   (23.5 MPa)
ENGINE  
Make/Model Yanmar 4TNV86CHT-MAW
Engine Displacement 128.0 cu in   (2.1 L)
Horsepower @ 2,300 rpm 61.2 hp   (45.6 kW)
Maximum Torque @ 1,800 rpm 146.0 ft-lb      (198.0 Nm)
FLUID CAPACITIES  
Engine Lubrication 7.8 qt   (7.4 L)
Cooling System 8.9 qt   (8.5 L)
Fuel Tank Capacity 16.2 gal   (61.5 L)
Fuel Consumption (65% of Full Load) 3.4 gal/hr    (12.8 L/hr)
Hydraulic Reservoir Capacity 10.8 gal   (41.0 L)
Front Axle Lubrication 4.9 qt   (4.6 L)
Rear Axle Lubrication 4.6 qt  (4.4 L)
MACHINE DIMENSIONS  
Max. Lift Height to Bucket Pin 10 ft 9.7 in (3,294 mm)
Dump Height Fully Raised 7 ft 5.0 in (2,263 mm)
Max. Reach Fully Raised 2 ft 2.4 in (670 mm)
Dump Angle 46°
Rollback Angle 43°
Overall Length with Bucket 17 ft 7.1 in (5,360 mm)
Overall Height 8 ft 6.4 in (2,599 mm)
Overall Operating Height 12 ft 4.3 in (3,766 mm)
Bucket Clearance Height 9 ft 8.7 in (2,964 mm)
Wheel Base 6 ft 6.7 in (2,000 mm)
Ground Clearance 20.5 in (520 mm)
Overall Width without Bucket 6 ft 3.0 in (1,905 mm)
Outside Turning Radius 12 ft 1.3 in (3,690 mm)
Inside Turning Radius 6 ft 5.3 in (1,840 mm)
Recommended Bucket Width 76.5 in (1,943 mm)