Takeuchi TL8R2

Takeuchi TL8R2 for sale at American Falls, Blackfoot, Idaho Falls, Rexburg, Rupert, Idaho

Double tap to zoom

Takeuchi TL8R2 for sale at American Falls, Blackfoot, Idaho Falls, Rexburg, Rupert, Idaho

 

Features

ENGINE

  • EPA Final Tier 4 Emission Compliant
  • Turbocharged
  • High Pressure Common Rail Fuel Injection System
  • DOC+DPF Exhaust After Treatment
  • Automatic Fuel Priming System
  • Active Power Control, Power Management System
  • Working Modes Standard and ECO Mode
  • Dual Element Air Cleaner
  • Hand and Foot Throttle Control
  • High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame

 

ELECTRICAL

  • 5.7” Multi-Informational Color Display
  • Sealed Rocker Switches
  • 12 volt System with 60 amp Alternator
  • LED Work Lights: Two Front and Two Rear
  • Heavy Duty, Easy Access Battery
  • Engine Preheat System
  • Hour Meter
  • Back-up Alarm
  • Horn
  • Takeuchi Fleet Management Telematics System

 

UNDERCARRIAGE AND FRAME

  • Double Reduction Planetary Drives
  • Permanently Sealed Track Rollers with Metal Face Seals
  • Fully Welded Frame with Integrated Cross Members
  • Two-Speed Travel
  • 15.7” Rubber Track
  • Grease Type Track Adjuster
  • Front and Rear Tie-Down Points
  • Rear Bumper Integrated into Frame
  • Creep Mode and Two-Speed Travel with Automatic Shift (optional HF Only)

 

OPERATOR’S STATION

  • Tilt-up Operator’s Station
  • Deluxe High Back Suspension Seat
  • Rear View Camera
  • Rear Pivoting Lap Bar with Arm Rest
  • ROPS / FOPS Level 1 Structure
  • Retractable 2” Seat Belt
  • Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper, and AM / FM / MP3 Radio with NOAA Weatherband (Cab Only)
  • Retractable 3” Seat Belt (optional)
  • 3 Point Retractable Seat Belt (optional)
  • Polycarbonate Door (High Flow Only)
  • FOPS Level II Roof Guard Kit (optional)

 

HYDRAULIC & WORKING EQUIPMENT

  • Radial Lift Design
  • Hydraulic Pilot Controls
  • Arm Float
  • Cushioned Arm Cylinders
  • Hydraulic Self Leveling System (Lift Only)
  • Proportional Auxiliary Hydraulic Controls with Detent
  • Pressure Relieving Flat Faced Coupler Body
  • 14-Pin Connector with Push Button Control
  • High Capacity Steel Hydraulic Tank
  • Mechanical Quick Hitch
  • Hydraulic Quick Coupler Cab Standard Equipment Canopy Field Kit Available
  • High Flow Auxiliary Hydraulics 33.8 gpm (optional)
  • Manual Parking Brake (optional)

 

TAKEUCHI FLEET MANAGEMENT

  • 2 Year Standard Service
  • Minimize Downtime
  • Remote Diagnostics
  • Utilization Tracking
  • Proactive Maintenance
  • Control Costs

Specifications

OPERATING PERFORMANCE  
Operating Weight - Canopy 8,807 lb    (3,995 kg)
Operating Weight - Cab 9,182 lb    (4,165 kg)
Tipping Load 6,041 lb   (2,740 kg)
Rated Operating Capacity, SAE J818* 2,116 lb   (960 kg)
Operating Load at 50% of Tipping Load 3,020 lb   (1,370 kg)
Bucket Breakout Force 6,204 lb    (2,814 kg)
Lift Arm Breakout Force 5,957 lb    (2,702 kg)
Traction Force 9,733 lb    (4,415 kg)
Ground Pressure - Canopy 4.5 psi    (31.0 kPa)
Ground Pressure - Cab 4.6 psi    (32.0 kPa)
Travel Speed - Low 4.7 mph   (7.5 km/hr)
Travel Speed - High 7.0 mph   (11.2 km/hr)
Creep Mode Low Range - (High Flow Only) .09 mph   (0.15 km/hr)
Creep Mode High Range - (High Flow Only) 3.1 mph   (5.0 km/hr)
*Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.  
HYDRAULIC SYSTEM  
Auxiliary Flow - Primary Circuit 19.1 gpm   (72.3 Lpm)
Auxiliary Flow - High Flow (optional) 33.8 gpm   (128.0 Lpm)
Hydraulic System Pressure 3,045 psi   (21.0 MPa)
ENGINE  
Make / Model Kubota V3307-CR-TE5B
Engine Displacement 203.2 cu in   (3,331 ml)
Horsepower @ 2,600 rpm 74.3 hp   (55.4 kW)
Maximum Torque @ 1,500 rpm 192.6 ft-lb   (261.1 Nm)
FLUID CAPACITIES  
Engine Lubrication 11.8 qt   (11.2 L)
Cooling System 15.9 qt   (15.0 L)
Fuel Tank Capacity 28.3 gal   (107.0 L)
Fuel Consumption (65% of Full Load) 2.8 gal/hr  (10.6 L /hr)
Hydraulic Reservoir Capacity 9.6 gal  (36.5 L)
Hydraulic System Capacity 15.9 gal  (60.0 L)
MACHINE DIMENSIONS  
Max. Lift Height to Bucket Pin 10' 1.2"  (3,080 mm)
Dump Height Fully Raised 7' 11.3"   (2,420 mm)
Dump Reach Fully Raised 2' 4.3"   (720 mm)
Dump Angle 38°
Rollback Angle 28°
Track Ground Contact Length 4' 7.9"   (1,420 mm)
Machine Length 9' 1.8"   (2,790 mm)
Transport Length 11' 5.2"  (3,485 mm)
Transport Height 7' 3.8"   (2,230 mm)
Transport Height with Top Guard 7' 6.1"    (2,290 mm)
Departure Angle 30°
Clearance Circle with Bucket 7' 2.3"   (2,190 mm)
Clearance Circle without Bucket 4' 10.4"   (1,485 mm)
Clearance Circle Rear 5' 4.8"   (1,645 mm)
Track Width 15.7"   (400 mm)
Ground Clearance 11.4"   (290 mm)
Overall Width without Bucket 5' 5.4"   (1,660 mm)
Bucket Width 5' 6.0"   (1,675 mm)