Takeuchi TL8

Takeuchi TL8 for sale at American Falls, Blackfoot, Idaho Falls, Rexburg, Rupert, Idaho

Double tap to zoom

Takeuchi TL8 for sale at American Falls, Blackfoot, Idaho Falls, Rexburg, Rupert, Idaho

 

Features

ENGINE

  • ENGINE
  • EPA Final Tier 4 Emission Compliant
  • Turbocharged
  • DOC+DPF Exhaust After Treatment
  • Active Power Control Power Management System
  • Working Modes - Power and ECO
  • Automatic Fuel Bleed System
  • High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
  • Dual Element Air Filter, with Pre-Cleaner

 

ELECTRICAL

  • Multi-Informational Display
  • Sealed Rocker Switches
  • 12 volt System with 60 amp Alternator
  • Halogen Work Lights, Front and Rear
  • Engine Preheat
  • Hour Meter
  • Back-up Alarm
  • Horn

 

UNDERCARRIAGE AND FRAME

  • Permanently Sealed Track Rollers with Metal Face Seals
  • Fully Welded Frame with Integrated Cross Members
  • Front and Rear Tie-Down and Lift Points
  • 2 Speed Travel
  • 15.7" Rubber Track with Integrated Steel Cables and Forged Steel Inserts
  • 12.6" Rubber Track with Integrated Steel Cables and Forged Steel Inserts (optional)

 

OPERATOR'S STATION

  • Tilt-up Operator's Station
  • Deluxe High Back Adjustable Suspension Seat
  • Rear Pivoting Seat Bar with Integrated Arm Rest
  • ROPS / FOPS Structure
  • Retractable 2" Seat Belt
  • Retractable 3" Seat Belt (optional)
  • 3 Point Retractable Seat Belt (optional)
  • Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper (optional)
  • AM/FM/MP3 Radio with NOAA Weatherband (optional)
  • Polycarbonate Door (High Flow Only)

 

HYDRAULIC & WORKING EQUIPMENT

  • Cushioned Boom Cylinders
  • Boom Float with Detent
  • Hydraulic Pilot Controls
  • Proportional Auxiliary Controls with Detent
  • Pressure Relieving Flat Faced Coupler Body
  • 14-Pin Connector with Push Button Control
  • Hydraulic Self Leveling
  • Mechanical Quick Coupler
  • Hydraulic Quick Coupler - Cab - Standard Equipment
  • Hydraulic Quick Coupler - Canopy - optional
  • Primary Flow Auxiliary Hydraulics 18.4 gpm
  • High Flow Auxiliary Hydraulics 33 gpm (optional Cab Only)
  • Pattern Change Valve (ISO or H) (optional)
  • d

Specifications

OPERATING PERFORMANCE  
Operating Weight - Canopy 8,455 lb    (3,835 kg)
Operating Weight - Cab 8,631 lb   (3,915 kg)
Tipping Load 6,020 lb   (2,731 kg)
Rated Operating Capacity, SAE J818* 2,105 lb   (955 kg)
ROC w/ Optional Counter Weight 2,323 lb   (1,054 kg)
Operating Load at 50% of Tipping Load 3,010 lb   (1,365 kg)
Bucket Breakout Force 6,856 lb  (3,110 kg)
Lift Arm Breakout Force 6,709 lb   (3,100 kg)
Traction Force 9,127 lb   (4,140 kg)
Ground Pressure - 15.7" Track 4.4 psi   (30.2 kPa)
Ground Pressure - 12.6" Track 5.4 psi   (37.2 kPa)
Travel Speed - Low 4.6 mph   (7.4 km/hr)
Travel Speed - High 6.8 mph   (11.0 km/hr)
*Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.  
HYDRAULIC SYSTEM  
Auxiliary Flow - Primary Circuit 18.4 gpm   (69.5 Lpm)
Auxiliary Flow - High Flow (optional) 33.0 gpm   (124.9 Lpm)
Hydraulic System Pressure 3,046 psi   (21.0 MPa)
ENGINE  
Make / Model Kubota / V3307-CR-Turbo
Engine Displacement 203 cu in   (3.3 L)
Horsepower @ 2,600 rpm 74.3 hp   (55.4 kW)
Maximum Torque @ 1,500 rpm 192 ft-lb   (260 Nm)
FLUID CAPACITIES  
Engine Lubrication 11.2 qt   (11.8 L)
Cooling System 14.8 qt   (14.0 L)
Fuel Tank Capacity 19.8 gal  (75.0 L)
Fuel Consumption (65% of Full Load) 2.69 gal/hr  (10.2 L /hr)
Hydraulic Reservoir Capacity 10.36 gal   (39.0 L)
Hydraulic System Capacity 15.3 gal  (58.0 L)