-
American Falls
(208) 226-5209(800) 727-3569 -
Blackfoot(208) 785-0008(877) 934-5479
-
Idaho Falls(208) 523-5455(800) 333-6145
-
Rexburg(208) 359-8000(800) 990-9943
-
Rupert(208) 436-3191(800) 743-9588
Takeuchi TL6R
Features
ENGINE
- U.S. EPA Final Tier 4 Emission Compliant
- Turbocharged
- DOC+DPF Exhaust After Treatment
- Active Power Control Power Management System
- Working Modes - Power and ECO
- Automatic Fuel Bleed System
- High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
- Dual Element Air Filter
ELECTRICAL
- Sealed Rocker Switches
- 12 volt System with 60 amp Alternator
- Work Lights, Front and Rear
- Engine Preheat
- Hour Meter
- Back-up Alarm
- Horn
UNDERCARRIAGE AND FRAME
- Permanently Sealed Track Rollers with Metal Face Seals
- Double and Triple Flange Track Rollers
- Fully Welded Frame with Integrated Cross Members
- Front and Rear Tie-Down and Lift Points
- Integrated Rear Bumper
- 2 Speed Travel
- 12.6" Quiet Ride Track Design
OPERATOR'S STATION
- 5.7" Color Multi-Informational Display with Rear View Camera
- Tilt-up Operator's Station
- Deluxe Adjustable Suspension Seat
- Rear Pivoting Seat Bar with Integrated Arm Rest
- ROPS / FOPS Structure
- Retractable 2" Seat Belt
- Retractable 3" Seat Belt (optional)
- 3 Point Retractable Seat Belt (optional)
- Pressurized Cab with Swing Out Door, A/C, Heat, Defrost and Front Wiper (optional)
- AM/FM/MP3 Radio with NOAA Weatherband (optional)
HYDRAULIC & WORKING EQUIPMENT
- Cushioned Boom Cylinders
- Boom Float with Detent
- Hydraulic Pilot Controls
- Proportional Auxiliary Controls with Detent
- Pressure Relieving 1/2" Flat Faced Coupler Body
- 14-Pin Connector
- Hydraulic Self Leveling
- Mechanical Quick Coupler (Canopy)
- Hydraulic Quick Coupler - Cab - Standard Equipment
- Hydraulic Quick Coupler - Canopy - optional
- Primary Flow Auxiliary Hydraulics 18.4 gpm
Specifications
| OPERATING PERFORMANCE | |
| Operating Weight - Canopy | 7,485 lb (3,395 kg) |
| Operating Weight - Cab | 7,780 lb (3,530 kg) |
| Tipping Load | 5,269 lb (2,390 kg) |
| Rated Operating Capacity, SAE J818* | 1,841 lb (835 kg) |
| Operating Load at 50% of Tipping Load | 2,635 lb (1,195 kg) |
| Bucket Breakout Force | 5,930 lb (2,690 kg) |
| Lift Arm Breakout Force | 4,860 lb (2,205 kg) |
| Traction Force | 8,655 lb (3,926 kg) |
| Ground Pressure - 12.6" Track | 5.1 psi (34.8 kPa) |
| Travel Speed - Low | 4.3 mph (7.0 km/hr) |
| Travel Speed - High | 6.2 mph (10.0 km/hr) |
| *Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load. | |
| HYDRAULIC SYSTEM | |
| Auxiliary Flow - Primary Circuit | 17.8 gpm (67.4 Lpm) |
| Hydraulic System Pressure | 2,988 psi (20.6 MPa) |
| ENGINE | |
| Make / Model | Kubota / V2403-CR-TE4B |
| Engine Displacement | 148.5 cu in (2.4 L) |
| Horsepower @ 2,700 rpm | 65.2 hp (48.6 kW) |
| Maximum Torque @ 1,500 rpm | 144.3 ft-lb (195.6 Nm) |
| FLUID CAPACITIES | |
| Engine Lubrication | 7.6 qt (7.2 L) |
| Cooling System | 14.0 qt (13.0 L) |
| Fuel Tank Capacity | 20.0 gal (75.7 L) |
| Fuel Consumption (65% of Full Load) | 2.69 gal/hr (10.2 L /hr) |
| Hydraulic Reservoir Capacity | 7.9 gal (30.0 L) |
| Hydraulic System Capacity | 13.5 gal (51.0 L) |
| MACHINE DIMENSIONS | |
| Max. Lift Height to Bucket Pin | 9 ft 6.4 in (2,905 mm) |
| Dump Height Fully Raised | 7 ft 5.6 in (2,275 mm) |
| Dump Reach Fully Raised | 1 ft 10.0 in (560 mm) |
| Dump Angle | 38° |
| Rollback Angle | 31° |
| Track Ground Contact Length | 4 ft 6.9 in (1,395 mm) |
| Machine Length | 8 ft 9.9 in (2,689 mm) |
| Transport Length | 10 ft 11.1 in (3,330 mm) |
| Transport Height | 6 ft 5.8 in (1,975 mm) |
| Departure Angle | 30° |
| Clearance Circle with Bucket | 6 ft 10.5 in (2,095 mm) |
| Clearance Circle without Bucket | 4 ft 6.9 in (1,395 mm) |
| Clearance Circle Rear | 4 ft 11.8 in (1,520 mm) |
| Track Width | 12.6 in (320 mm) |
| Ground Clearance | 9.1 in (230 mm) |
| Overall Width without Bucket | 5 ft 0.2 in (1,530 mm) |
Hide