-
American Falls
(208) 226-5209(800) 727-3569 -
Blackfoot(208) 785-0008(877) 934-5479
-
Idaho Falls(208) 523-5455(800) 333-6145
-
Rexburg(208) 359-8000(800) 990-9943
-
Rupert(208) 436-3191(800) 743-9588
Takeuchi TL12V2
Features
ENGINE
- EPA Final Tier 4 Emission Compliant
- Turbocharged and Intercooled
- DOC+DPF+SCR Exhaust After Treatment
- High Pressure Common Rail Injection System
- Active Power Control Power Management System
- Selectable Work Modes - Power and ECO
- Dial Throttle Control
- Automatic Fuel Bleed System
- Extended Life Coolant
- High Capacity Radiator, Hydraulic Oil Cooler and Intercooler Mounted Side-by-Side on Swing Out Frame
- Duel Element Air Cleaner
ELECTRICAL
- 12 volt System with 80 amp Alternator
- Heavy Duty, Quick Access Battery
- LED Work Lights, Front and Rear
- 5.7" Color Multi-Informational Display with Rear Camera
- Sealed Rocker Switches
- Back-up Alarm
- Horn
UNDERCARRIAGE AND FRAME
- 17.7" Quiet Track Design with Wide Block Tread
- Long Track Frame
- Fully Welded Frame with Integrated Cross Members
- Rear Bumper Integrated into Frame
- Front and Rear Tie-Down and Lift Points
- Permanently Sealed Track Rollers with Metal Face Seals
- Double Reduction Planetary Drives
- 2 Speed Travel
OPERATOR'S STATION
- Pilot Operated Controls
- Deluxe High Back Adjustable Suspension Seat
- Rear Pivoting Seat Bar with Integrated Arm Rests
- ROPS/FOPS Structure
- Retractable 2" Seat Belt
- 3 Point Seat Belt (optional)
- FOPS Level 2 Roof Guard (optional High Flow)
- Polycarbonate Front Door (optional High Flow)
- Pressurized Cab with Roll-up Door, Air Conditioning, Heat, Defrost, Front/Rear Wiper and AM/FM/MP3 Radio (Cab Only)
HYDRAULIC & WORKING EQUIPMENT
- Vertical Lift Loader Design
- Heavy Duty Low Cross Member
- Cushioned Boom Cylinders
- Boom Float with Detent
- Hydraulic Pilot Controls
- Proportional Auxiliary Controls with Detent
- Pressure Relieving Flat Faced Coupler Body
- Hydraulic Self Leveling (ON/OFF)
- Mechanical Quick Coupler
- Hydraulic Quick Coupler (standard on cab units)
- 14-Pin Connector with Push Button Control (optional)
- Primary Flow Auxiliary Hydraulics 23.2 gpm
- High Flow Auxiliary Hydraulics 40.4 gpm (optional)
- Secondary Auxiliary Circuit 23.2 gpm (optional)
- Ride Control (optional)
- Control Pattern Change Valve (ISO or H) (optional)
Specifications
| OPERATING PERFORMANCE | |
| Operating Weight - Canopy | 12,860 lbs (5,835 kg) |
| Operating Weight - Cab | 13,190 lbs (5,985 kg) |
| Tipping Load | 11,737 lbs (5,324 kg) |
| Rated Operating Capacity @ 35%* | 4,107 lbs (1,863 kg) |
| Operating Load @ 50% of Tip Load | 5,868 lbs (2,662 kg) |
| Bucket Breakout Force | 7,874 lbs (3,571 kg) |
| Lift Arm Breakout Force | 7,109 lbs (3,225 kg) |
| Traction Force | 14,006 lbs (6,353 kg) |
| Ground Pressure | 4.8 psi (33.0 kPa) |
| Travel Speed - Low | 5.0 mph (8.1 km / hr) |
| Travel Speed - High | 7.3 mph (11.6 km / hr) |
| *Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load. | |
| HYDRAULIC SYSTEM | |
| Auxiliary Flow - Primary Circuit | 23.2 gpm (88.0 Lpm) |
| Auxiliary Flow - High Flow (optional) | 40.4 gpm (153.0 Lpm) |
| Auxiliary Flow - 2nd Circuit (optional) | 23.2 gpm (88.0 Lpm) |
| Hydraulic System Pressure | 3,481 psi (24.0 MPa) |
| ENGINE | |
| Make / Model | Kubota / V3800-TIF4B |
| Engine Displacement | 230 cu in (3.8 L) |
| Horsepower @ 2,400 rpm | 111.3 hp (83.0 kW) |
| Maximum Torque @ 1,500 rpm | 284 ft-lb (385 Nm) |
| FLUID CAPACITIES | |
| Engine Lubrication | 13.9 qt (13.2 L) |
| Cooling System | 19.0 qt (18.0 L) |
| Fuel Tank Capacity | 32.7 gal (123.9 L) |
| DEF Fluid Tank Capacity | 4.8 gal (18.0 L) |
| Fuel Consumption (65% of Full Load) | 3.8 gal / hr (14.4 L / hr) |
| Hydraulic Reservoir Capacity | 13.2 gal (50.0 L) |
| Hydraulic System Capacity | 24.8 gal (94.0 L) |
| MACHINE DIMENSIONS | |
| Max. Lift Height to Bucket Pin | 10 ft 10 in (3,299mm) |
| Dump Height Fully Raised | 8 ft 1.0 in (2,459 mm) |
| Max. Mid-Height Reach | 4 ft 8.0 in (1,416 mm) |
| Dump Reach Fully Raised | 3 ft .4 in (924 mm) |
| Dump Angle | 46.8° |
| Rollback Angle | 32° |
| Track Ground Contact Length | 5 ft 7.6 in (1,717 mm) |
| Machine Length | 10 ft 6.0 in (3,203 mm) |
| Transport Length | 13 ft 3.3 in (4,045 mm) |
| Transport Height | 7 ft 9.7 in (2,381 mm) |
| Departure Angle | 29° |
| Clearance Circle with Bucket | 8 ft 2.6 in (2,504 mm) |
| Clearance Circle without Bucket | 5 ft 3.4 in (1,610 mm) |
| Clearance Circle Rear | 6 ft 1.0 in (1,848 mm) |
| Track Width | 17.7 in (450 mm) |
| Ground Clearance | 12.2 in (310 mm) |
| Overall Width without Bucket | 6 ft 5.2 in (1,960 mm) |
Hide