Great Plains SS1300

Great Plains SS1300 for sale at American Falls, Blackfoot, Idaho Falls, Rexburg, Rupert, Idaho

Double tap to zoom

Great Plains SS1300 for sale at American Falls, Blackfoot, Idaho Falls, Rexburg, Rupert, Idaho

 

Features

Point Options

Points for the 1¼" Straight-Legged Shanks are available in 2" or 7" widths, and with or without fins (fins minimize blow-out). The 2"-wide point is the least aggressive, while the 7"-wide point is the most aggressive and is used to cover more residue. A no-till point that is approximately 10" wide is used with the ¾" No-Till Shank. The no-till point minimizes surface disturbance and maximizes soil-structure-shatter below the surface. It also increases the amount of exposed surface residue and buries very little trash.

 

Optional Berm Conditioners
With 1" solid rods, the 16"-diameter berm conditioners mounted to each shank help provide a level surface, enabling single-pass seedbed preparation.

 

Adjustable Gauge Wheel

A screw jack makes adjusting the gauge wheels simple and easy.

 

2 Different Shank Options

Options include a 1¼" Straight-Legged Shank or a ¾" No-Till Shank. The no-till shank is not as aggressive as the straight-legged shank in turning the soil over and covering residue. In most soil conditions, the no-till shank only leaves a shank slot exposed on the soil surface and shows a gentle uplifting of the earth between shanks. Therefore, it should be used where less ground disturbance is desired. Replaceable wear shins are standard for either shank option.

 

Choice of Auto-Reset or Shear Bolt Shank Mounts>With 3000 lb. trip force, the Auto-Reset Shanks provide stop-free operation in areas where sub-surface obstructions exist. Alternatively, the Shear Bolt Mounts provide obstruction protection at a lower purchase cost than the Auto-Reset Shanks.

 

20" HEAVY-DUTY UTILITY COULTERS

Large 20" utility coulters cut residue directly in front of the shanks. This allows it to pass by without catching the shanks.

Specifications

MODEL INFO Sub-Soiler
MODEL SS1300
SHANK SPACING 24" (available on SS1800 and SS2000 only), 30", 36", 38", 40"
TIRES 20.5 x 8 10-ply (gauge wheels)
WEIGHT (approx. lbs.) 3,170 (3 Shank)
PTO H.P. REQ (min) 50 per shank
DIMENSIONS
TILLAGE WIDTH 7' 6" - 16'
TRANSPORT WIDTH 11' 8"
TRANSPORT HEIGHT N/A
TILLAGE INFO
CENTER SECTION N/A
1ST WING SECTION N/A
2ND WING SECTION N/A