Disc Modules: Rugged and Easy Service, Repair or Replacement
Shock Protection System
Heavy Duty Knives
The Most Options to Fit Your Operation
Make | Case IH |
Model | RD163 |
Disc Header | |
Cutting width, ft in (m) | 16' 1" (4.90) |
Conditioner type, Roll or Flail | Roll |
Conditioner Removable or can be omitted | Yes |
Overall header width, ft in (m) | 16' 3" (4956) |
Cutting height range, in (mm) | 0.7 to 3.5 (18 to 89) |
Cutter bar angle range, degrees | 0 to 10 |
Header drive | Hydrostatic, two drive motors |
Flotation | Hydraulic |
Weight, lbs (kg) | 4,400 (1996) |
Disc Cutterbar | |
Number of discs | 10 |
Knives per disc | 2 |
Disc cutting diameter, in (mm) | 24.3 (618) |
Disc drive components | Bevel gearsets in individual sealed modules |
Disc speed, rpm | 2500 |
Disc blade tip speed, mph (kph) | 181 (291) |
Crop movement, cutterbar to conditioner | |
Transition description, cutterbar to conditioner | Full width auger w/ discharge paddles |
Conditioner | |
Roll / Rotor length, in (mm) | 102 (2591) |
Roll / Rotor diameter, in (mm) | 10.375 (264) |
Roll / Rotor speed, rpm | 938 |
Roll / Rotor material, standard | Rubber |
Alternate roll material | Steel or High-contact urethane |
Roll surface pattern, standard | Chevron intermeshing |
Roll pressure system | Torsion bar |
Roll adjustment method | Crank |
Windrow/swath width, in (mm) | 38 to 96 (965 to 2438) |
Sales Literature | |
Literature number | CIH07211103 |
Literature date | 7/1/2011 |
Operators Manual | |
Manual number | HF-5124-10 |
Manual date | 9/1/2010 |
Manufacturing status | Current |
First Entry Date | 3/1/2012 |
Revision Date | -- |
-
Model | RD163 w/ Flail Conditioner |
Disc Header | |
Cutting width, ft in (m) | 16' 1" (4.90) |
Conditioner type, Roll or Flail | Flail |
Conditioner Removable or can be omitted | Yes |
Overall header width, ft in (m) | 16' 3" (4956) |
Cutting height range, in (mm) | 0.7 to 3.5 (18 to 89) |
Cutter bar angle range, degrees | 0 to 10 |
Header drive | Hydrostatic, two drive motors |
Flotation | Hydraulic |
Weight, lbs (kg) | 4,280 (1941) |
Disc Cutterbar | |
Number of discs | 10 |
Knives per disc | 2 |
Disc cutting diameter, in (mm) | 24.3 (618) |
Disc drive components | Bevel gearsets in individual sealed modules |
Disc speed, rpm | 2500 |
Disc blade tip speed, mph (kph) | 181 (291) |
Crop movement, cutterbar to conditioner | |
Transition description, cutterbar to conditioner | Full width auger |
Conditioner | |
Roll / Rotor length, in (mm) | 102 (2591) |
Roll / Rotor diameter, in (mm) | 22 (560) |
Roll / Rotor speed, rpm | 1011 std, 726 opt |
Roll / Rotor material, standard | 100 tapered flail tines, 20 degree offset |
Alternate roll material | Optional textured hood liner |
Roll surface pattern, standard | Tines and smooth hood surface |
Roll pressure system | Tines move crop across hood surface |
Roll adjustment method | Adjustable hood over rotor |
Windrow/swath width, in (mm) | 36 to 96 (914 to 2438) |
Sales Literature | |
Literature number | CIH3090902 |
Literature date | 3/1/2009 |
Other Documentation | |
Document number | HF-5130-11 |
Document date | 8/1/2011 |
Status and Entry Dates | |
Manufacturing status | Current |
First Entry Date | 3/1/2012 |
Revision Date | -- |