Case 588H

588H 588H

Double tap to zoom



CASE 588H Forklift

The CASE 586H and 588H increase productivity and efficiency with industry-leading lift speed and dependable, high-performing lift capacities. These rough terrain forklifts are able to operate in a variety of terrains with the optional 4 four-wheel drive and standard differential lock. And don’t worry about your load, CASE offers maximum travel capabilities with their 60 degrees of mast tilt and optional load control. If operating in tight areas is a concern, the 588H features a narrow zero-tail swing design, meaning if the rear tires clear it the rear of the machine will as well. CASE rough terrain forklifts feature an industry standard ITA class 3 carriage and forks allowing a wide range of aftermarket attachments.

These forklifts feature a simple, cost-effective Tier 4 Final solution. The 74 horsepower, 3.4 liter FPT engine uses a Diesel Oxidation Catalyst (DOC) with a maintenance-free Particulate Matter Catalyst (PM Catalyst) to deliver a minimum of 5% better fuel efficiency than our previous models and faster response times while meeting current environmental standards.

Without a disruptive third mast, our wide-channel, dual-mast design gives the H Series unmatched visibility. A narrow operating console further help increase front view so operators can confidently secure materials and a low-profile hood provides a clear view behind the machine. The large operating platform provides ample room for any operator. Add the optional deluxe suspension and load control for a comfortable ride on any terrain.

From tool-free swing-out access doors, and spin-on filters, to ground-level site gauges and grouped service points, you can do daily maintenance in a matter of minutes. It’s the easiest way to help you get the most performance and longest life out of your machine. Axles are also easily serviced without complete disassembly for easy upkeep.


Emission Rating Tier 4 Final
Engine make / model FPT F5HFL463D
Gross Power - hp (kW) 74 (55)
Net Power - hp (kW) 68 (51)
Rated speed - rpm 2200
Torque - lbf / ft (Nm) 233 (316)
No. of Cylinders 4
Displacement - Inches³ (cm³) 207 (3.4)
Transmission Type Power Shuttle
Travel speed unladen - mph (kph) 24 (38.6)
Front tire size 19.5-24
Rear tire size 12-16.5
Pump Flow - gallons (US) / min (lt/min) 24 (91)
Max Lift at Load Center - lbs (kg) 8000 (3628)
Load center - inches (mm) 24 (610)
Mast tilt forward - ° 45
Mast tilt backward - ° 15
Lifting speed - yard / sec (m/sec) 118 (0.60)
Overall height to top of mast (mast closed) - inches (mm) 125.2 (3180)
Overall operating height (mast raised to full height) - inches (mm) 220 (5590)
Height to top of cab - inches (mm) 104.1 (2645)
Wheelbase - inches (mm) 84 (2130)
Operating weight - lbs (kg) 16,978 (7701)
Fuel tank - gallons (US) (ltr) 31 (119)