banner

Case IH Farm Utility Farmall 115U (Canada Only)

Utility Farmall U Series Utility Farmall 115U (Canada Only)

Double tap to zoom

 

Features

Designed for Reliability and Dependability

Similar to larger Case IH tractors, the utility Farmall®  U series tractors feature the groundbreaking engineering of Case IH FPT Engines.  Engineered for dependable, quiet, clean operation, utility Farmall U tractors are powered by a four-cylinder diesel engine that is turbocharged and aftercooled, clean burning, fuel efficient, and Tier 4 B/Final-emissions certified. The rugged 3.4L (207-CID) engine provides maximum power and torque response. Featuring:

  • Wastegate turbocharger boosts engine power and torque and reduces noise emissions.
  • Up to 99 PTO hp (73 kW) to get you through challenging terrain and tough crop and soil conditions

 

From Rugged to Sophisticated

The utility Farmall U Series features a 16 x 16 semi-powershift transmission and includes an electrohydraulic power shuttle and a 25 mph (40 KPH) top speed (tire size dependent). In addition a hydraulically engaged wet clutch provides smoother performance and longer life.

12 X 12 Power Shuttle Transmission

  • Includes a clutch-free, electro-hydraulic Power Shuttle for smooth directional changes
  • Features three ranges with four synchronized speeds per range
  • Allows on-the-go shifting between each gear within a range


24 x 24 Transmission

In addition to the 12x12 transmission features, the 12x12 features a two-speed Powershift:

  • Powershift provides a HI and LO speed in every gear
  • Press the Powershift button on the transmission lever for a 15 percent decrease in speed and an 18 percent increase in torque to pull through tough spots on the go without interrupting PTO speed
  • Power Shuttle provides smooth, clutch-free direction changes and faster cycle times for loader work
  • The shuttle lever is located on the left side of the steering column for fingertip control, freeing your right hand to operate the loader or implement.


20 x 20 Power Shuttle Creeper Transmission

  • Offers an electrohydraulic power shuttle and seven speeds under 1 mph (1.6 km/h) for low-speed operations
  • The three-speed range lever and four-speed gear shift lever are conveniently placed to your right
  • Speed transmission gears are synchronized for easy on-the-go shifting within each range


Comfort That Will Keep You in the Field Until the Job Is Done

  • Spacious cab with ergonomically placed controls increase operator comfort and reduce fatigue
  • Redesigned HVAC system creates better airflow for a more comfortable operator environment
  • Curved upper windshield and standard high visibility roof panel increases safety and productivity during loader operation
  • Several seat options with a standard instructional seat
  • Four rubber isolation mounts reduce vibration and noise
  • Six work lamps and two wraparound headlights plus optional LED working lights help illuminate your work area
  • Choose the seat you like: Deluxe fabric seat with mechanical suspension or a fully adjustable, swivel air-ride seat with adjustable armrest
  • Optional suspended cab for increased comfort


Hydraulics for Demanding Applications

  • High-capacity hydraulic system provides a total flow of 33.5 gpm (127 Lpm) with a 22.1 gpm (83.9 Lpm) at the remotes—ample flow for demanding applications
  • Dependable 22.1 gpm (83.9 L/min) hydraulic gear pump provides power to remote and 3 point hitch
  • Separate steering pump provides 11.4 gpm (43.3 L/min seperate steering and services pump
  • 22.2 gpm (84.0 Lpm) implement flow hydraulic pump for more demanding applications
  • Two deluxe closed-center rear remotes are standard
  • First remote has detent, float and flow control, which is also available for the second remote
  • Third remote is available


Hitch Capacities to Meet Your Needs

Utility Farmall U Series tractors' tough 3-point hitch is made of forged steel and features:

  • Electronic draft control and position control to allow precise settings for draft load, draft sensitivity, working height and max height
  • Easy raise/lower with the push of the button and controls familiar to other Case IH tractors, allows the implement to easily be raised to the max set height, and back down to a consistent working depth
  • Wheel slip limit can be set if radar equipped
  • 6,393 lbs (2900 kg) lift capacity
  • Standard telescopic stabilizers and telescopic lower link ends assist in implement attachment
  • Both right and left turnbuckle adjustments for implement leveling
  • Optional Front 3-Point Hitch and PTO with lift capacity of 3,968 lbs (1800 kg)


The Take Off You Demand

  • Fully independent PTO with electrohydraulic engagement provides easy operation
  • Standard 540/1000 RPM PTO
  • Available 540/540E/1000 RPM PTO


Tough and Versatile to Fit Your Needs

Utility Farmall U axles are available with an MFD axle and feature

  • Rugged design to take the punishment of field transport
  • 55-degree turning angle for maximum maneuverability
  • Electrohydraulic rear differential lock engagement and front axle limited slip differential with electrohydraulic MFD engagement for maximum traction in slippery conditions
  • Optional suspended axle for increased comfort

Specifications

Make Case IH
Model Farmall 115U Canada Only (2015-Present)
Engine Performance  
Advertised Engine Power, Rated, hp (kW) 114 (85)
Maximum Engine Power, hp (kW) Same as advertised
Rated Engine Speed, rpm 2300
Power Boost, hp (kW) No boost
Fuel Tank capacity, gal (L) 37 (140)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) No DEF
PTO Performance  
PTO Horsepower, Basic / Optional Transmission, hp (kW) 98 (73)
PTO Speeds, rpm 540 / 1000 std; 540E opt.
PTO operational Type (Independent; Live; Continuous) Independent
Basic Engine  
Engine Make Case IH FPT
Engine Model 3.4 L
Number of Cylinders 4
Displacement, cu in (L) 207 (3.4)
Engine Bore, in (mm) 3.90 (99)
Engine Stroke, in (mm) 4.33 (110)
Block Design, Replaceable Liners Parent bore block
Aspiration, Turbocharged or Naturally Aspirated Turbocharged, air-to-air aftercooled
Fuel System  
Fuel System Description High Pressure Common Rail
Fuel System Control, Electronic or Mechanical Electronic
Fuel Injection to combustion chamber, Direct or Indirect Direct
Emission and Exhaust Treatment  
Emission Level, US EPA Tier Tier 4A (Interim)
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) No
Exhaust Gas Recirculation (EGR) Cooled EGR
Cleanup Catalyst (CUC) No
Diesel Oxidation Catalyst (DOC) DOC standard
Diesel Particulate Filter (DPF) DPF standard
Exhaust Pipe, Vertical stack or Horizontal Vertical stack
Cooling System  
Fan Drive Type Belt
Electrical System  
System Rating, Volts 12
Alternator Rating, Amps 120
Basic Transmission Configuration  
Manufacturer's Description 16x16 Semi-Powershift
Transmission Type 4 Powershift speeds in 2 synch, 2 non-synch ranges
Number of Forward / Reverse Speeds 16F / 16R
Maximum Speed Forward, mph (kph) 25 (40)
Creeper Range Available Yes, see optional
Shuttle (Forward-Reverse) Available Standard
Optional Transmission 1  
Manufacturer's Description 32x32 Creeper
Transmission Type Semi-Powershift with Shuttle
Number of Forward / Reverse Speeds 32F / 32R
Optional Transmission 2  
Manufacturer's Description No option
Transmission Type No option
Number of Forward / Reverse Speeds No option
Wheel or Track Configuration  
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks 4WD
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer Front Steer
Rear Axle Assembly  
Final Drive Location and Description Inboard planetary
Axle Output End, Flange or Bar Flange
Axle Bar Diameter, in (mm) No bar axle
Front Axle  
Suspended Front Axle Available No
Brakes  
Service Brake Type Wet disc
Hydraulic System  
Hydraulic System Type Open Center w/CCLS remotes
Main Hydraulic Pump Type Dual gear
Implement Pump Flow, gpm (Lpm) 21.1 (80)
Optional Pump Flow, gpm (Lpm) No option
Number of Standard Remote Valves 3 std
3-Point Hitch Features  
3-Point Hitch Category Category 2
Optional Hitch Category np
Draft Sensing or Lift Control Electronic Draft Control
Draft Link Ends Telescopic Yes
3-Point Hitch Lift Capacity  
Standard Lift Capacity 24 Inches behind pin, lb (kg) 6,393 (2900)
Optional Lift Capacity 24 Inches behind pin, lb (kg) No option
Standard Lift Capacity at lift pin, lb (kg) np
Optional Lift Capacity at lift pin, lb (kg) np
Drawbar  
Drawbar Description Swinging, Category 2
Wheelbase / Trackbase  
Wheelbase, 2WD, in (mm) No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) 93.7 (2380)
Length  
Length, 2WD, incl. Hitch/Drawbar, in (mm) No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) 165 (4191)
Vertical Dimensions  
Height to Top of Cab, in (mm) 105.6 (2684) std; 107.2 (2724) susp. cab
Height to Top of ROPS raised, in (mm) No open ROPS
Width w/Tires or Tracks  
Overall Width, with standard wheels or tracks, in (mm) 83 (2108) across fenders
Weight (w/Tires or Tracks)  
Weight, 2WD w/ROPS, lb (kg) No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) No open ROPS
Weight, 2WD w/Cab, lb (kg) No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) 9,700 (4400)
Weight, Total allowable, w/maximum ballast, lb (kg) 10,360 (4700)
Tire / Track Size  
Front Tire Size, 2WD No 2WD
Front Tire Size orTrack Width, MFD/4WD or Track 14.9 R24 R1W
Rear Tire Size or Track Width 460/85 (18.4) R34
Sales Literature  
Literature Number TA-1408-14
Literature Date 12/1/2014
Secondary Literature Source  
Secondary Literature Number --
Secondary Literature Date --
Other Documentation  
Document Number --
Document Date --
Status and Entry Dates  
Manufacturing Status, Current or Archive Current
First Entry Date 1/1/2015
Revision Date --