banner

Case 885B

885B 885B

Double tap to zoom

 

Features

CASE 885B Motor Grader

PRODUCTIVITY
Get the flexibility of both manual and automatic shifting to match the job conditions at hand with our powershift direct-drive transmission. Increased power, stability and turning performance to the moldboard are delivered through the A-frame and high-strength circle. And for unmatched ground-breaking power, our rear-ripper accommodates up to five teeth and front scarifier accommodates 11 teeth.

FUEL EFFICIENCY
Move even more dirt with less horsepower and better fuel economy through a multi-radius involuted moldboard design.

COMFORT/VISIBILITY
Superior all-around visibility and a clear view of the moldboard are achieved with floor-to-ceiling cab glass. Operator comfort is provided by ergonomic, low-effort control levers positioned within easy reach.

SERVICEABILITY
Get easy access to the engine and perform daily maintenance checkpoints with the friendly flip-up hood. And reaching the fill port or grease zerks is simple with ground-level access including our exclusive fuel fill with lockable cap. 

Specifications

ENGINE  
Emission Rating Tier 3
Engine make / model CASE
Net Power - hp (kW) 219 (163)
Rated rpm - rpm 2200
Gross Power - hp (kW) 234 (175)
No. of Cylinders 6
Displacement - Inches³ (ltr) 409 (6.7)
Peak Engine Torque - lbf / ft (Nm) 726 (984)
Transmission type Powershift
Speed Range - Forward 8
   
DIMENSIONS  
Wheelbase - ft/in (mm) 20 ft 5 in (6219)
Blade Base (blade to frt wheel) - ft/in (mm) 8 ft 5 in (2562)
Overall Length - ft/in (mm) 28 ft  (8534)
Overall Height w/cab - ft/in (mm) 10 ft 11 in (3340)
Clearance Under Front Axle - inches (mm) 14.9 (380)
Bank Cut Angle - ± ° 90
Shoulder Reach Outside Wheels - Right - ft/in (mm) not published
Shoulder Reach Outside Wheels - Left - ft/in (mm) not published
Blade Lift Above Ground - inches (mm) 17.5 (444.5)
Blade Pitch Operation - Adjustment Fwd - ° 42
Blade Pitch Operation - Adjustment Rear - ° 87
Blade Side Shift Right - inches (mm) 27 (686)
Blade Side Shift Left - inches (mm) 21 (533)
Circle Rotation - ° 360
Circle Diameter - inches (mm) 69 (1752.6)
Standard moldboard length - ft/in (mm) 14 ft  (4267)
Moldboard height - inches (mm) 23.6 (600)
   
CAPACITIES  
Fuel Tank - gallons (US) (ltr) 90 (341)
Hydraulic Reservoir - gallons (US) (ltr) 25 (94.6)
SAE Operating Weight - lbs (kg) 40466 (18355)
Weight on Front Wheels - lbs (kg) 12496 (5668)
Weight on Tandem Wheels - lbs (kg) 27970 (12687)